Schaal 1:10 Freewing FJ31114P A-10 Thunderbolt II Warthog EPO 1700mm PNP V2 #10148
Our price:
€649.00
€699.00
-New, tool-free, quick-release wings for extremely easy assembly and disassembly -Switchable, flashing LED creates a realistic muzzle flash effect in flight -Improved LED lighting system with navigation lights, strobe, nose landing gear spot, and formation lights -Painted, CNC-machined shock absorber struts and additional landing gear doors for maximum detail -Enlarged, plastic-reinforced battery compartment for larger batteries and greater durability -Removable scale details such as the AAS-35 laser tracker and fuselage strakes can be mounted via a sliding system -Antenna and pitot tube details feature a plug-in system for easy transport and assembly -Glue-free assembly and simplified -wiring for quick initial setup -Reinforced engine nacelles for greater stability and durability -Centered ball-joint linkages on the elevators for even force distribution and improved responsiveness -Complete set of scale-accurate weapons—tool-free installation -Three decal sheets included—for customization -Speed controller with thrust reversal for shorter landing distances and precise ground control -Two 3530-1900Kv outrunner motors combined with 9-blade EDF systems deliver high thrust -Spring-loaded access panels for battery and electronics—quick and convenient -Landing gear suitable for grass runways—with metal joints and hardened steel pins -Hand-painted pilot figure rounds out the scale experience -Ball-joint linkages on all control surfaces for precise control -Durable nylon hinges for reliable performance -Officially licensed by Northrop Grumman
Freewing A-10 Thunderbolt II Super Scale Twin 80mm EDF Jet V2 – PNP
Two 9-blade 80mm EDF units installed
Two 3530-1900Kv outrunner motors installed
Two 100A ESCs with thrust reverser and EC5 connectors installed
Electronic retractable landing gear (installed)
All servos (installed)
Scale: 1:10
Wingspan: 1700 mm
Length: 1551 mm
Takeoff weight (without battery): 4.74 kg
Center of gravity: 78 mm behind the leading edge of the wing at the root (with landing gear retracted, model upright)
Power system: 2x 3530-1900Kv brushless outrunner motors
2x 100A ESCs with thrust reversal and EC5 connectors
2x 80 mm EDFs with 9-blade propellers
Servos:
Nose wheel steering: 17g digital metal gearbox with 600mm cable
Nose landing gear door: 9g digital servo with 200mm cable
Ailerons: 30g digital metal gearbox with 100mm cable
Landing flaps (outer): 17g digital metal gearbox with 400mm cable
Landing flaps (inner): 17g digital metal gearbox with 200mm cable
Elevator: 23g digital metal gearbox with 200mm cable
Rudder: 17g digital metal gearbox with 400mm cable
Landing gear: CNC-milled aluminum, shock-absorbing and retractable
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Landing flaps: Yes
Lighting: Yes
Hinge Type: Reinforced nylon hinges
Material: EPO foam
Difficulty Level: Advanced
Build Time: Approx. 1 hour
Recommended Environment: Outdoors
Recommended Takeoff/Landing Surface: Hard or well-maintained grass runways
Show more
Show less
Up to 12 months' warranty on used products
Repair and digitization by specialists
Not satisfied? Get your money back
More than 40 brands
Schaal 1:10 Freewing FJ31114P A-10 Thunderbolt II Warthog EPO 1700mm PNP V2 #10148 is available to buy in increments of 1
More Information
| SKU |
20261003113505 |
| Stock location |
HOS |
| Condition |
New |
| Packaging |
With original packaging |
| Condition of packaging |
Good condition |
| Warranty |
Factory Warranty |
| Item |
Other models (cars, ships, airplanes, cranes, etc.) |
| Technical condition |
Functioning 100% |
-New, tool-free, quick-release wings for extremely easy assembly and disassembly -Switchable, flashing LED creates a realistic muzzle flash effect in flight -Improved LED lighting system with navigation lights, strobe, nose landing gear spot, and formation lights -Painted, CNC-machined shock absorber struts and additional landing gear doors for maximum detail -Enlarged, plastic-reinforced battery compartment for larger batteries and greater durability -Removable scale details such as the AAS-35 laser tracker and fuselage strakes can be mounted via a sliding system -Antenna and pitot tube details feature a plug-in system for easy transport and assembly -Glue-free assembly and simplified -wiring for quick initial setup -Reinforced engine nacelles for greater stability and durability -Centered ball-joint linkages on the elevators for even force distribution and improved responsiveness -Complete set of scale-accurate weapons—tool-free installation -Three decal sheets included—for customization -Speed controller with thrust reversal for shorter landing distances and precise ground control -Two 3530-1900Kv outrunner motors combined with 9-blade EDF systems deliver high thrust -Spring-loaded access panels for battery and electronics—quick and convenient -Landing gear suitable for grass runways—with metal joints and hardened steel pins -Hand-painted pilot figure rounds out the scale experience -Ball-joint linkages on all control surfaces for precise control -Durable nylon hinges for reliable performance -Officially licensed by Northrop Grumman
Freewing A-10 Thunderbolt II Super Scale Twin 80mm EDF Jet V2 – PNP
Two 9-blade 80mm EDF units installed
Two 3530-1900Kv outrunner motors installed
Two 100A ESCs with thrust reverser and EC5 connectors installed
Electronic retractable landing gear (installed)
All servos (installed)
Scale: 1:10
Wingspan: 1700 mm
Length: 1551 mm
Takeoff weight (without battery): 4.74 kg
Center of gravity: 78 mm behind the leading edge of the wing at the root (with landing gear retracted, model upright)
Power system: 2x 3530-1900Kv brushless outrunner motors
2x 100A ESCs with thrust reversal and EC5 connectors
2x 80 mm EDFs with 9-blade propellers
Servos:
Nose wheel steering: 17g digital metal gearbox with 600mm cable
Nose landing gear door: 9g digital servo with 200mm cable
Ailerons: 30g digital metal gearbox with 100mm cable
Landing flaps (outer): 17g digital metal gearbox with 400mm cable
Landing flaps (inner): 17g digital metal gearbox with 200mm cable
Elevator: 23g digital metal gearbox with 200mm cable
Rudder: 17g digital metal gearbox with 400mm cable
Landing gear: CNC-milled aluminum, shock-absorbing and retractable
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Landing flaps: Yes
Lighting: Yes
Hinge Type: Reinforced nylon hinges
Material: EPO foam
Difficulty Level: Advanced
Build Time: Approx. 1 hour
Recommended Environment: Outdoors
Recommended Takeoff/Landing Surface: Hard or well-maintained grass runways
Call us: +31 (0) 72-5618707 
